nixos/modules/installer/sd-card/sd-image-raspberrypi.nix


1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52

# To build, use:
# nix-build nixos -I nixos-config=nixos/modules/installer/sd-card/sd-image-raspberrypi.nix -A config.system.build.sdImage
{
  config,
  lib,
  pkgs,
  ...
}:

{
  imports = [
    ../../profiles/base.nix
    ./sd-image.nix
  ];

  boot.loader.grub.enable = false;
  boot.loader.generic-extlinux-compatible.enable = true;

  boot.consoleLogLevel = lib.mkDefault 7;
  boot.kernelPackages = pkgs.linuxKernel.packages.linux_rpi1;

  sdImage = {
    populateFirmwareCommands =
      let
        configTxt = pkgs.writeText "config.txt" ''
          # u-boot refuses to start (gets stuck at rainbow polygon) without this,
          # at least on Raspberry Pi 0.
          enable_uart=1

          # Prevent the firmware from smashing the framebuffer setup done by the mainline kernel
          # when attempting to show low-voltage or overtemperature warnings.
          avoid_warnings=1

          [pi0]
          kernel=u-boot-rpi0.bin

          [pi1]
          kernel=u-boot-rpi1.bin
        '';
      in
      ''
        (cd ${pkgs.raspberrypifw}/share/raspberrypi/boot && cp bootcode.bin fixup*.dat start*.elf *.dtb $NIX_BUILD_TOP/firmware/)
        cp ${pkgs.ubootRaspberryPiZero}/u-boot.bin firmware/u-boot-rpi0.bin
        cp ${pkgs.ubootRaspberryPi}/u-boot.bin firmware/u-boot-rpi1.bin
        cp ${configTxt} firmware/config.txt
      '';
    populateRootCommands = ''
      mkdir -p ./files/boot
      ${config.boot.loader.generic-extlinux-compatible.populateCmd} -c ${config.system.build.toplevel} -d ./files/boot
    '';
  };
}